|
|
|
|
|
 |
| >>> Your
position→Other→XSG
SERIES ROTATING DRYING MACHINE |
| >>> MAIN
USES |
Rotary
flash drier developed by our plant through searching related
information , features rational design , compact structure
, novel and wide application etc , which can be used for
the fields as color , dyeing materials , fine chemical
, pesticide, fertilizer ,feed , food , pharmaceutical
and electronics etc ., capable of reaching the requirement
of high efficient and speedy , energy saving , compact
equipment and larger production , being the first creation
in the nation and reaching the advanced level of 1990s.We
use CAD design upon undertaking non-standard equipment
design , having the advantages as prompt , convenient
, efficient and correct etc .
Working principle
:hot air is fed into the mixing-crushing-drying chamber
through bottom of the drier at suitable spraying speed
from the inlet pipe , and produces strong shearing , floating
and rotation effect, by which , material is palletized
of the drier , granulate group with larger size and humidity
is mechanically crushed under the effect of mixer, granulate
with lower size and humidity is lifted up by rotary air
flow , during which ,it's further dried . As both pneumatic
and solid phased are rotary flowed , inertia of solid
phase is larger than the pneumatic one , larger relative
speed between two phases strengthens their heat transmission
media ,thus creating high productive strength of the machine
. Main features :
1.As material is palletized by centrifugal , shearing
, impact and friction , high dispersity and high relative
speed between pneumatic and solid phases strengthen the
heat transmission media between two phases , ensuring
higher productive strength.
2.Drying air enters into the bottom of the drier and produces
strong rotary air flow , which produces strong wash out
effect to the materials on the wall thus eliminated the
wall adhesion .
3. In the high temperature area on the bottom of the drier
, thermal sensitive material is not contacted with the
hot surface directly , solving the coking and discoloring
problem of thermal sensitive material is not contacted
with the hot surface directly , solving the coking and
discoloring problem of thermal sensitive materials .
4. High air flow speed in the drying chamber results in
short stay of materials ,reaching the requirement of high
efficient , speedy , and compact equipment with larger
production.
5.Elutriator and swirler are equipped on the top of the
drying chamber to control size and humidity of the output
materials , meeting different of different
materials. |
|
|
 |
|
